Qunfeng Machinery undertakes the review meeting of the industry standard project ‘General Technical Requirements for Automatic Block Production Line’ to promote the industry

On January 19, the “General Technical Requirements for Automatic Block Production Line” industry standard project review meeting (hereinafter referred to as the “review meeting”) hosted by the National Building Materials Industry Machinery Standardization Technical Committee and undertaken by Qunfeng Machinery was successfully held in Quanzhou, Fujian.

Review meeting members group photo

Zhang Sicheng, Secretary-General of the China Aerated Concrete Association, Wang Yumin, Secretary-General of the National Building Materials Industry Machinery Standardization Technical Committee and Executive Vice President of the China Building Materials Machinery Industry Association, Liu Jiaqing, Deputy Director of the National Building Materials Industry Machinery Product Quality Supervision and Inspection Center, Zhang Jianhai, Assistant General Manager of Fujian Qunfeng Machinery Co., Ltd., Huang Jiazhong, Director of the Construction Machinery Technology Research Institute of Fujian Qunfeng Machinery Co., Ltd., and representatives from relevant units across the country attended the review meeting.

 Review meeting scene

The industry standard “General Technical Requirements for Automatic Block Production Line” was drafted by Fujian Qunfeng Machinery Co., Ltd. The main object of its discussion is the concrete automatic block production line, which is suitable for the complete set of automatic production line equipment for producing concrete blocks with cement and admixtures as the main cementing materials, and sand, stone, fly ash, slag, coal gangue, construction waste recycled aggregate, etc. as the main raw materials. After the standard is formulated, it can guide the rise and development of the industry with standardized guidance and unified planning, and make it step into the new building materials road of high automation and greening.

Zhang Sicheng, Secretary-General of the China Aerated Concrete Association, combined with the relevant regulations of industry standard management, put forward three hopes: first, the technical content of the standard should play a leading role. Through high standards to force industrial upgrading, promote the high-end, green and intelligent development of the industry. Second, members of the review group should actively participate in the standard formulation work and boldly discuss the clauses in the draft for review. Third, it is hoped that the drafting unit will expand the scope of opinion solicitation and strictly implement the standard formulation work. Picture: Zhang Sicheng, Secretary-General of the China Aerated Concrete Association.

Zhang Sicheng, Secretary-General of the China Aerated Concrete Association

Zhang Jianhai, Assistant General Manager of Fujian Qunfeng Machinery Co., Ltd., delivered a welcome speech. He said that Nan’an, as the “hometown of brick machines in China”, is a gathering place for the production of concrete block molding machines in China. The review meeting of the industry standard project “General Technical Requirements for Automatic Block Production Line” held in Nan’an is a great incentive and spur to the block molding machine production enterprises in Nan’an. It is hoped that the majority of block molding machine enterprises in Nan’an will fully play a demonstrative leading role and actively participate in the formulation of this industry standard. Picture: Zhang Jianhai, Assistant General Manager of Fujian Qunfeng Machinery Co., Ltd.

Zhang Jianhai, Assistant General Manager of Fujian Qunfeng Machinery Co., Ltd.

Huang Jiazhong, Director of the Construction Machinery Technology Research Institute of Fujian Qunfeng Machinery Co., Ltd., introduced the project background and main content of the industry standard “General Technical Requirements for Automatic Block Production Line” at the meeting, and discussed the formulation principles of the automatic block production line industry standard from the aspects of the composition of the complete set of equipment for the automatic block production line, model parameters, technical requirements, installation and debugging, and delivery. Picture: Huang Jiazhong, Director of the Construction Machinery Technology Research Institute of Fujian Qunfeng Machinery Co., Ltd.

Huang Jiazhong, Director of the Construction Machinery Technology Research Institute of Fujian Qunfeng Machinery Co., Ltd.

At this meeting, the compilation instructions, opinion solicitation summary table, standard text (draft for review) and other materials of the “General Technical Requirements for Automatic Block Production Line” were reviewed item by item, and modification opinions were put forward. In the end, the review committee unanimously agreed to pass the review of the draft for review of the standard, and required the drafting work group to carefully modify it according to the expert review opinions of the standard review meeting, and report the modified standard approval draft and related documents on time.

As the main drafting unit of the industry standard “General Technical Requirements for Automatic Block Production Line”, Qunfeng Machinery has actively participated in and supported the formulation of national and industry standards in the industry for many years. Up to now, it has deeply participated in the drafting and revision of more than 30 national and industry standards, and has won more than 300 patents for inventions, utility models, and appearances. In 2021, Qunfeng Machinery’s “block molding machine” and “an automatic offline palletizing production line” respectively won the “China Excellent Design Award” and “China Patent Excellence Award”, and the results of scientific and technological innovation are remarkable.

“Block Molding Machine” won the “China Excellent Design Award”

“Automatic Offline Palletizing Production Line” won the “China Patent Excellence Award”

Qunfeng Machinery has a 215,000 square meter intelligent industrial park, forming a scale of more than 300 sets of processing equipment and 500 sets of annual assembly capacity, deeply cultivating the building materials machinery field for more than 20 years, with industry-leading scientific research strength and rich engineering case experience and sincere cooperation with customers. At present, Qunfeng has created many outstanding automatic brick production line model cases around the world, injecting continuous power into the building materials industry around the world.

Yunnan - Qunfeng’s large-scale automatic brick production line with an annual output of 60 million standard bricks

Libya - Qunfeng’s super large automatic brick production line

Sri Lanka - Qunfeng’s large automatic brick production line

In the future, Qunfeng will continue to work hard with experts and peers to strive to improve various standards in the building materials machinery industry. Qunfeng will continue to play the role of the main force in the industry, relying on its rich experience and strong scientific research strength in the application of automatic block production lines, actively undertake the responsibility of the main drafting unit of industry standards, and provide more power for promoting the high-quality development of China’s block equipment industry.