Home / Products / AAC Brick Machine

loading

AAC Brick Machine

AAC Block are made of flyash (lime slag or sand) as main raw material,cement and lime as cementing materials,and aluminum powder as foaming agent.The main forming procedures are Material crushing,measuring,mixing,pouring,curing,cutting and steaming.

Availability:
Quantity:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button
  • AAC

  • QUNFENG

Product Description

AAC Block are made of flyash (lime slag or sand) as main raw material,cement and lime as cementing materials,and aluminum powder as foaming agent.The main forming procedures are Material crushing,measuring,mixing,pouring,curing,cutting and steaming.As a new wall body material with the characteristics of light weight, heat preservation,energy saving,waste recycling, environmental protection and convenience etc,AAC Light-weight block is now emphatically promoted by the world.

aac序号

(01)Belt Conveyor (02)Batching Machine (03)Roller Screen (04)Grinding Head Silo (05)Wet Ball Mill (06)Jaw Crusher (07)Dust Catcher (08)Bucker Elevator (09)Silo For Coarse Lime (10)Dry Ball Mill (11)Silo For Fine lime (12)Cement Silo (13)Screw Conveyor (14)Slurry Storage Tank (15)Weighing Hopper For Slurry (16)Weighing Hopper For Lime And Cement (17)Ferry Cart (18)Turning Crane (19)Vertical Cutting Machine (20)Horizontal Cutting Machine (21)Turning & Grouping Crane (22)Curing Cart (23)Autoclave (24)Finished Product Crane (25)Block Clamping Machine (26)Winch For Side Plate Return



Production Procedure

Raw Material Preparation → Cement → Lime → Gypsum → Additive → Sand → Raw Material Batching → Mixing and Casting → Used for adding steel bars into aerated concrete slabs (optional) → Pre-curing → Turning crane turns over the mould and start to demould → Cutting cart gets ready → Cutting machine cuts the formed material horizontally and vertically → remove the bottom part of the formed material → Group the curing cart and send the semi-finished products into the auto claves → Curing → Finished blocks move out from the auto claves → cubering → packed for loading → Finished products transportation →

1. Raw Material Treatment

AAC block production line needs to pulverize the siliceous material such as sand, fly ash, etc. According to raw materials and the process characteristics, the grinding process could be classified into: dry grinding into powder, wet grinding with water into slurry and mixed grinding with lime. Mixed grinding also could be classified into dry mix for preparing plastic material and wet grinding with water. Wet grinding technology with water is to improve the characteristics of fly ash or sand, which is called “hydrothermal ball smashing” Generally, most of limes are lump limes, and should be crushed and grinded. Gypsum ( plaster) generally will not be grinded alone, commonly add with fly ash or lime, and to be grinded with the same miller of lime. Other auxiliary materials and chemicals are often prepared in advance.
Raw material preparation process is the preparatory process of ingredient, which is to meet the technological requirements and processing of raw materials and the store process before completing the ingredients for the entire production can be carried out smoothly, product quality can meet the requirements of the most basic aspects of the process have a direct impact.
(1)Jaw Crusher

In order to make the material meets the technological requirements of aerated concrete blocks, generally calcareous and siliceous materials should be grinded. Before entering the mill, some bulk materials should be crushed firstly, in order to achieve feed size required to enter the secondary ball mill grinding.
a. Operating Principle
During running, the motor through the belts driven eccentric shaft rotation, so that the movable jaw periodically closes and leaves the fixed jaw,and thus the materials are squeezed, rubbed, grinded, so that the materials are smaller , gradually falling from discharge port.
b. Features
The crusher has characteristics such as: large crushing ratio, high yield, uniform particle size, simple structure, reliable operation, easy maintenance, economic cost etc.
c. Main Technical Specification

Model

Max.Diameter Of Feeding Material (mm)

Discharging Size (cm)

Production Capactity(t/h)

Power(kW)

Weight(t)

Mainframe Dimension (L×W×H)(mm)

PEX-150×750

125

10-40

10-40

15

3.5

1430×1635×1108

PEX-250×750

210

25-60

15-30

22

4.5

1667×1545×1020

PEX-250×1000

210

25-60

20-52

30-37

6.5

1580×1964×1380

PEX-250×1200

210

25-60

25-60

37

7.7

1580×2164×1430

PEX-300×1300

250

20-80

30-90

55

11

1750×2320×1730

(2)Bucket Elevator

Bucket elevator is indispensable equipment in AAC production line. It is used to carry lime, gypsum and other materials which have been pulverized by jaw crusher into storage silos, which is the preparation for raw material mixing.
a. Operating Principle
NE bucket elevator consists of operation parts (bucket and traction belt), upper parts with transmission drum, bottom parts with tension roller, middle enclosure, actuating device, and braking device etc. It is used to convey powder with loose density material(ρ < 1.5t/m³), particulate or block such as coal, sand ,breeze, cement and broken ore etc .
b. Main Features
NE Bucket elevator adopts the flow-through feeding way. Material will be conveyed to the top via Plate-Link chain, then discharge under the effect of gravity. Our elevators are Multi-Standard, high production capacity and low energy –consumption. It is designed as totally-enclosed with slow-running chain, which can avoid the material returning, so no power wasted. Meanwhile, there is no noise pollution while it works.
c. Main Technical Specification

Model

Conveyor Capacity  (m³ /h)

Hoisting Speed (m/s)

Main Shaft Speed (r/min)

Diameter Of Material (mm)

Hoperp

Volume(L)

Width(mm)

Distance(mm)

NE15

15

0.5

15.54

<40

2.5

250

203

NE30

30

0.5

16.45

<50

7.8

300

305

(3)Belt Conveyor


Belt conveyor is very important transportation equipment in AAC production line, used to transport fly ash, sand, lime and other raw materials, is the most efficient continuous conveyor equipment, conveyor belt moves by friction-drive principles. Featured with big capacity, long transmission, smooth transportation, materials and conveyor no relative motion, less noise, simple structure, easy maintenance, less energy consumption and standardized components.

a. Main Technical Data for Belt Conveyor

Belt Width (mm)

Length (m) Power (kW)

Speed (m/s)

Capacity (t/h)

500

≤12 / 3

12-20 / 4-5.5

20-30 / 5.5-7.5

0.8-1.0

50-191

650

≤12 / 4

12-20 / 5.5

20-30 / 7.5-11

0.8-1.60

80-250


(4)Ball Mill


Raw materials grinding is an important step in the AAC block production. Lime, gypsum, sand, slag and other materials could be fully mixed and interact only after powder grinding, then to make products strength qualified. Ball mill is the key equipment of the material smashing.
a. Working Principle of Ball Mill
Ball mill is a horizontal cylinder rotating device, outer gear, two cabins, lattice-type ball mill. Raw materials are evenly fed into the first cabin through hollow shaft screw. There is ladder liner or corrugated liner inside the first cabin, and different size steel ball. When ball mill is working, the cabin generates centrifugal force and brings the ball to a certain height and falls then pound and grinds the materials. After coarse grinding in first cabin, raw materials will come to the second cabin through the single-compartment plate. There are flat lining and steel ball in the second cabin, and will grind raw materials father. Finally, powder will be discharged through the discharge grate plate to complete the grinding operation.
b. Main Features
The machine consists of feeding part, discharging part, turning part and driving part (reducer, small transmission gear, motors, electrical control) and other major components. This machine uses outer gear, hollow shaft support. Hollow shaft adopted steel casting, and removable liner, turning gearwheel machining adopted casting hobbling, wear liners was embedded in the cylinder (there are two kinds of liners: rubber liner & steel liner, the rubber one is light, low noise, wearable, good sealing, generally preferred. )This machine has good wear resistance as well as smoothly & reliable running.
c. Main Technical Data of Ball Grinder

Model

Φ1.5×5.7

Φ1.83×7

Φ2.2×7

Φ2.4×8

Capacity (t/h)

3.5-4

8-12

15-17

19-22

Max.Diameter Of Feeding Material (mm)

≤25

≤25

≤25

≤25

Loading (T)

11

21

30

40

Power (kW)

130

245

380

475

Weight(t)

23

36

49

68

(5)Wasted-Slurry Mixing Tank (Ahead the Ball Mill)

Wasted-Slurry mixing tank consists of fixing platform, ladder, barrier, mixer and tank. Usually the wasted slurry from ferry cart and all other wasted material should be mixed with water in the tank. The mixed material will be recycled used with the original slurry.

(6)Lime, Cement Silo

The silo role is used for storage of materials, it’s with air cushion or vibration motor; according to volume, the specifications are: 100m ³, 200m ³, 300m ³. They can be configured according to the demand of select lines.
2. Dosing And Pouring

The dosing are equipments which are weighted finished batching materials and all raw materials ,adjusted temperature ,concentration and added material as well, then according to the requirement of process, feeding material into mixer at one time. Dosing is a key link of aerated concrete process, related to the raw material between the percentage of active ingredients, in relation to the fluidity and viscosity of slurry is appropriate whether aluminum powder suitable for gas and green body hardening normally.
Pouring process is the unique production process of aerated concrete which is different from other kinds of concrete. Pouring process is the batching process after the measurement and the necessary adjustment put into mixer to mix the materials, made to process the stipulated time, temperature, density of slurry, through the pouring hole of mixer poured into a mould. Slurry makes a series of physical and chemical reactions in the mould and produces bubble, and the bubble makes the slurry inflated, thickened and hardened. Pouring process is an important process for affecting pore structure; the dosing process and pouring process constitute a core part of the production process of AAC block.
Pre-Curing process is mainly the process after pouring slurry to continue to be thickened and hardened.
(1)Weighing System

The physical states of raw materials for aerated concrete are liquid type, slurry type, powder type, powder aluminum and lump aluminum. Different materials have different weighing scales, such as lime scale, cement weighing hopper, slurry weighing tank etc.Material will be precisely measured by the automatic measuring system.
a. Lime & Cement Weighing Hopper

Used to weigh cement and lime, and then convey them into pouring mixer.

Volume

Annual Capacity

1.2m³

≤150000m³

2.0m³

﹥150000m³

b. Slurry Weighing Tank
Used to weigh slurry and then put it into pouring mixer.

Volume

Annual Capacity

2.5m³

≤150000m³

4.5m³  

≤150000m³

c. Water Measuring Tank
water measuring and Automatic transferring water to the slurry mixer.

Measuring Range

Annual Capacity

250Kg

≤150000m³

500 Kg

﹥150000m³

(2) Aluminum Powder Mixer

Consist of the cylinder, a bracket and a pneumatic butterfly valve (double signal output device). It is used to mix aluminum powder.

(3) Pouring Mixer

A pouring mixer is consist of mixing barrel, mixing shaft, transmission mechanism, diversion device, nozzle device and so on, which is the main equipment of aerated concrete plant. Pouring mixer is used to mix slurry, cement, lime, gypsum and powder aluminum with certain proportion, after mixed uniformly and full reaction, then pour mixed slurry into mould frame in time.

Model

Diameter Of Barrel (mm)

Diameter Of Vane (mm)

Mixing Speed (r/min)

Power (kW)

Annual Capacity (m³/year)

4.2m

1700

570

566

37

≤150000

4.8m

1900

600

590

37

200000-250000

6m

2000

640

650

45

300000

(4) Pouring Ferry Cart

Pouring ferry cart is the essential equipment of autoclaved section in the AAC block production line which for dragging. It is consists of the cart frame, drive and positioning mechanism. The cart frame is welded by section steel. Drive is consist of reducer, coupling, shaft, the driving wheel and driven wheel. Ferry cart has the characteristics of strong power in dragging and pushing, and stopping. when quickly moving, it could position and connect accurately, and could be frequency slow running when full loading, also could be frequency fast running when empty loading.

Ferry Truck Specifications (m)

Loading (t)

Walking Speed/Frequency (m/min)

Track Spacing (mm)

Power (Kw)

Annual Capacity (m³/year)

4.2

6

0 ~20

3620

7.5

≤150000

4.8

8

4220

9

20-250000

6

10

4970

15

300000

(5) Mould Frame, Side Plate
Moulds of AAC block production line are divided into mould frame and side plate, which is an important equipment of product forming. The mixed raw materials through pouring mixer poured into mould, gasing and pre-curing, after solidify, demoulding, then the green block can be cut. The mould frame and side plate can contain slurry, pre-curing, gasing, solidify after combination. At the same time, side plates take green blocks to cutting machine for cutting, and group into Curing Cart , then move into the autoclave.

Model

Dimension (m)

Cubage Of Single Mould (m³/Mould)

Annual Capacity (m³/year)

Length

Width

Height

4.2×1.2×0.6m

4200

 1200

 600

3.024

≤150000

4.8×1.2×0.6m

4800

3.456

200000-250000

6×1.2×0.6m

6000

4.32

300000


3. Turning &Cutting
Turing crane and Cutting Machine are the two main equipment in AAC Block production plant,which are used for Block Cake cutting and Shape processing. The Turning & Cutting technology has the features of: Bulk Molding, Flexible Shape& Size, and Massive Mechanization production.
(1) Turning Crane

Turning crane consists of hanger, rings, rotary lock, and rigging shackle etc. It is used for block demoulding and transferring.
Turning crane will overturn the block of 90°in air. Then demoulding will subsequently be done. The seperated side plate will combine with the returned Mould Frame for recycling slurry pouring.

Model

Loading (t)

Max.Distance Of Hanger (mm)

Walking Speed/Frequency (m/min)

Power (kW)

Annual Capacity (m³/year)

4.2×1.2m

10

 1300

0-18

16.5

≤150000

4.8×1.2m

12

0-51

18.5

200000-250000

6×1.2m

20

0-51

22

300000

(2) Cutting Machine

It is consist of vertical cutting machine and horizontal cutting machine. After the pouring Aerated concrete will become a formed cake after pre-curing. The cake will be cut into the exact size according to user’s requirement.

Vertical Cutting Machine

Horizontal Cutting Machine

Working Principle
After demoulding, the Side Plate with block cake will be transferred and fixed on Cutting Cart, which will be driven by Motor. Then the cake will move to the cutting machine for Vertical and Horizontal cutting. When cakes arrived at horizontal cutting machine, the Side Plate with Cake will be uplifted by lifting device. Cutting cart will turn back to the start position and prepared for another transportation while Horizontal cutting. After Horizontal cutting, the Lifting device will load the Side Plate with Cake on another Cutting Cart. Then the cake will be moved to Vertical cutting Machine for vertical processing.

Model

Body Size (m)

Cuting Precision (mm)

Cutting Cycle Time (min /Mould)

Diameter Of Cutting Wire (mm)

Annual Capacity (m³/year)

4.2m

4.2×1.2×0.6

 ±3、±1.5、±1.5

≤5


≤150000

4.8m

4.8×1.2×0.6

≤5

φ0.8

200000-250000

6m

6.0×1.2×0.6

≤6


300000

(3) Tilting &Grouping Crane
After cutting, Tilting &Grouping crane will separate the Bottom and Top waste by tilting block cake. And then will hoist and transfer the cake for grouping,


Model

Loading (t)

Max.Distance Of Hanger (mm)

Walking Speed/Frequency (m/min)

Power (kW)

Annual Capacity (m³/year)

4.2×1.2m

10

 1850

0-20

20.5

≤150000

4.8×1.2m

12

0-51

22.5

200000-250000

6×1.2m

20

0-51

26

300000

(4) Grouping Crane
Grouping Crane will vertically move the Cake with side plate via the chain. Chain is drived via the Oil Cylinder and the crane will be horizontally moved at the function of Gear motor. This is how the cake moves and groups.

4. Finished Product

The block cake will be cured in the autoclave. It is the last working procedure which will directly affect the quality of finished block.
As the automation improvement, block separating and packing system are also commonly used. After the drying, AAC Blocks move out of autoclaves, though the process of hoisting, separating, and packing, they could be transferred to finish –products area by forklift.
(1) Curing Cart

Curing cart consist of fame and wheel. It is used for transferring the block in and out of the Autoclave, which is dedicated transportation cart during production. It sent the cut green block into autoclave for curing, and move out to finish-products area after curing.

Model

Loading (t)

Gage Between Wheel (mm)

Track Gauge (mm)

Number Of Moulds Mould/Cart

Annual Capacity (m³/year)

4.2m

10

3010

630

2

≤150000

4.8m

12

3450

856

3

20-250000

6m

20

4460

856

3

300000

(2) Autoclave

Being the core equipment in the production line, Autoclave is used to cure the Block under high pressure and temperature.

Model

Design Pressure (Mpa)

Set Tempreture (°C)

Working Medium

Opening Method

Annual Capacity (m³/year)

φ2×31m

 1.6

 204

Saturated water vapor

Open the door  on both ends

≤150000

φ2.5×31m

200000-250000

φ2.68×39m

300000

(3) Finished-block Clamp

Finished-block clamp are equipped at special crane. The walking and lifting of clamp both rely on the crane. The lifting is oriented by Guiding Frame, which is stable and accurate. It is specially used for moving finished blocks from side plate for final packing.

Model

Loading (t)

Max.Distance Of Hanger (mm)

Walking Speed/Frequency (m/min)

Power (kW)

Annual Capacity (m³/year)

4.2×1.2m

10

 1750

0-18

16.5

≤150000

4.8×1.2m

12

0-51

18.5

200000-250000

6×1.2m

20

0-51

22

300000

(4) Mobile Separator

Separator is used to separate the finished block from layer to layer. Our separator will automatically do the working and group the finished products
(5) Automatic Cuber Crane

Cuber Crane will cuber the Finished Products after the Separating process. It will divide the finished products stack by stack. Thereafter, the tank-type conveyor will move the stacked block for packing
(6) Automatic Pallet Provider

Equiped with Block Clamping system and Tank-Type conveyor.Efficiently and Stably providing the Pallet for production
(7) Tank-Type Conveying and Packing System

Finished Block will be packed after the separating and stacking. The Packed Blocks will be transferred to finished products via forklift.

(8) Boiler
Boiler is used to provide heat energy and steam for autoclave to guarantee the interior high pressure and temperature, which ensure the block to complete the hydration reaction for qualified AAC block.


Previous: 
Next: 

Related Products

Get In Touch With Us
Intelligent Technology    
High Efficiency and Environmental Friendly

Quick Links

Products

Contact Us
  group@qunfeng.com
  +86-595-22356789
 +86-595-22356788

 /  /  : +86-18150503129

  Marketing Center : No.11,Zhitai Road,Quanzhou Economy&Technique Development Zone,Fujian

Copyright © 2022 Fujian Qunfeng Machinery Co., Ltd. All Rights Reserved.  Sitemap